AudioCodes Mediant MSBR Series User Manual

Reference Guide 514 Document #: LTRT-17939
Mediant MSBR
73.4 SHDSL Commands
The commands below describe SHDSL.
73.4.1 interface SHDSL 0/0
Symmetric High-speed Digital Subscriber Line (SHDSL, sometimes called G.SHDSL) is a
popular WAN access technology using copper wire pairs.
The purpose of this command is to configure physical-layer properties of SHDSL, such as
the number of wire-pairs in use. See the sub-commands "mode" and "group" for additional
information.
Once the physical layer is configured, proceed to ATM interfaces using the command
"interface atm".
Note: The commands described in Sections 40 to Section 42.3 are also applicable to the
SHDSL interface.
Syntax
interface shdsl <slot>/<port>
Command Description
slot Defines the location of the SHDSL hardware mezzanine. Must be 0.
port Defines the location of the SHDSL hardware mezzanine.
Default
The system will attempt to detect the correct configuration automatically, by sensing line
connectivity and negotiating connection parameters with the Internet Service Provider.
Command Mode
Privileged User
Example
The example below describes how to define the SHDSL interface.
(config-data)# interface shdsl 0/0

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English