AudioCodes Mediant MSBR Series

Version 7.2 643 Mediant MSBR
Reference Guide 75. Layer-3 Commands
75.2.2.11 router-id
This command specifies the router ID (as an IP address)
Syntax
router-id <a.b.c.d> [vrf <vrf name>]
no ip router-id
Command Description
a.b.c.d Defines the local IP address
VRF name Defines the vrf name (up to 64 bytes).
Default
NA
Command Mode
Privileged User
Example
This example specifies the router ID as an IP address.
(config-data)# router-id 10.15.4.12
75.2.2.12 aggregate-address
This command specifies an aggregate address for both IPv4 and IPV6.
Syntax
aggregate-address a.b.c.d/M
aggregate-address a.b.c.d/m summary-only
aggregate-address a.b.c.d/m summary-only as-set
aggregate-address a.b.c.d/m as-set
aggregate-address a.b.c.d/m as-set summary-only
aggregate-address a.b.c.d a.b.c.d
aggregate-address a.b.c.d a.b.c.d summary-only
aggregate-address a.b.c.d a.b.c.d summary-only as-set
aggregate-address a.b.c.d a.b.c.d as-set
aggregate-address a.b.c.d a.b.c.d as-set summary-only
aggregate-address x:x::x:x/m
Command Description
a.b.c.d Defines an IPv4 IP address or subnet mask.
a.b.c.d/m Defines an IPv4 IP address/network prefix.