AudioCodes Mediant MSBR Series User Manual

Version 7.2 373 Mediant MSBR
Reference Guide 59. gateway
59.4.2 isdn-supp-serv
This command configures the Supplementary Services table, which lets you define
supplementary services for endpoints (FXS and ISDN BRI) connected to the device.
Syntax
(config-voip)# gateway dtmf-supp-service isdn-supp-serv <Index>
(isdn-supp-serv-<Index>)#
Command Description
caller-id-enable {allowed|not-
configured|restricted}
Enables the receipt of Caller ID.
caller-id-number Configures the caller ID name of the endpoint (sent to the
IP side).
cfu-to_phone-number Configures the phone number for BRI Call Forward
Unconditional (CFU) services.
cfb-to_phone-number
Configures the phone number for BRI Call Forward Busy
(CFB) services.
cfnr-to_phone-number
Configures the phone number for BRI Call Forward No
Reply (CFNR) services.
local-phone-number Configures a local telephone extension number for the
endpoint.
module Configures the device's module number to which the
endpoint is connected.
no-reply-time Configures the timeout, in seconds.
phone-number Configures a global telephone extension number for the
endpoint.
port Configures the port number on the module to which the
endpoint is connected.
presentation-restricted
{allowed|not-
configured|restricted}
Determines whether the endpoint sends its Caller ID
information to the IP when a call is made.
user-id Configures the User ID for registering the endpoint to a
third-party softswitch for authentication and/or billing.
user-password Configures the user password for registering the endpoint
to a third-party softswitch for authentication and/or billing.
Command Mode
Privileged User
Example
This example configures supplementary service for port 2:

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English