AudioCodes Mediant MSBR Series User Manual

Reference Guide 372 Document #: LTRT-17939
Mediant MSBR
Command Description
char-conversion
Configures Unicode-to-ASCII character conversion rules.
dflt-dest-nb
Configures the default destination phone number which is
used if the received message doesn't contain a called
party number and no phone number is configured in the
Trunk Group table.
dial-plan-index
Configures the Dial Plan Index.
digitmapping
Configures the digit map pattern
used to reduce the dialing
period when ISDN overlap dialing for digital interfaces.
dt-duration
Configures the duration, in seconds, that the dial tone is
played, for digital interfaces, to an ISDN terminal.
dtmf-inter-digit-
threshold
Configures the threshold of the received DTMF
InterDigitTime, in milliseconds.
first-dtmf-option-type
Configures the first preferred transmit DTMF negotiation
method.
hook-flash-option
Configures the hook-flash transport type.
hotline-dt-dur
Configures the duration, in seconds, of the hotline dial
tone.
isdn-tx-overlap
Enables ISDN overlap dialing for IP-to-Tel calls.
min-dg-b4-routing
Configures the minimum number of overlap digits to collect
- for ISDN overlap dialing - before sending the first SIP
message for routing Tel-to-IP calls.
mxdig-b4-dialing
Configures the maximum number of collected destination
number digits that can be received.
oob-dtmf-format
Configures the DTMF Out-of-Band transport method.
rfc-2833-in-sdp
Global parameter that enables the device to declare the
RFC 2833 'telephony-event' parameter in the SDP.
second-dtmf-option-
type
Configures the second preferred transmit DTMF
negotiation method.
special-digit-rep
Configures the representation for ‘special’ digits‘*’ and ‘#’.
that are used for out-of-band DTMF signaling using SIP
INFO/NOTIFY.
special-digits
Determines whether the asterisk*. and pound#. digits can
be used in DTMF.
strict-dial-plan
Enables Strict Dial Plan.
telephony-events-
payload-type-tx
Configures the Tx RFC 2833 DTMF relay dynamic payload
type for outbound calls.
time-btwn-dial-digs
Analog: Configures the time, in seconds, that the device
waits between digits that are dialed by the user. ISDN
overlap dialing: Configures the time, in seconds, that the
device waits between digits that are received from the
PSTN or IP during overlap dialing.
Command Mode
Privileged User

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English