AudioCodes Mediant MSBR Series User Manual

Reference Guide 652 Document #: LTRT-17939
Mediant MSBR
Default
Router identifier value is selected as the largest IP address of the interfaces.
Command Mode
Privileged User
Example
This example sets the Cluster ID.
(config-data)# router bgp 1
(conf-router)# bgp cluster-id 10.13.22.130
75.2.2.27 bgp client-to-client reflection
This command configures client-to-client route reflection.
Syntax
bgp client-to-client reflection
Default
NA
Command Mode
Privileged User
Example
This example configures client-to-client route reflection.
(config data) # bgp client-to-client reflection
75.2.2.28 bgp bestpath as-path
This command specifies that the length of confederation path sets and sequences that should
be taken into account during the BGP best path decision process.
Syntax
bgp bestpath as-path {confed|ignore}
Command Description
confed Compare path lengths including confederation sets &
sequences in selecting a route.
ignore Ignores as-path length when selecting a router.
Default
NA

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English