AudioCodes Mediant MSBR Series User Manual

Reference Guide 792 Document #: LTRT-17939
Mediant MSBR
76.11 TACACS+ Commands
TACACS+ is a security protocol for centralized username and password verification. The
following describes the TACACS+ commands.
76.11.1 tacacs-server
This command provides support for communicating with a TACACS+ server through the
device's WAN interface.
Syntax
tacacs-server timeout <seconds>
tacacs-server source data source-address interface <Interface ID>
tacacs-server source data interface <Interface ID>
tacacs-server source data vrf <vrfname>
tacacs-server source voip
tacacs-server port <port-number>
tacacs-server obscured-key <string>
tacacs-server host <host-ip>
tacacs-server key <string>
Command Description
VRF name Defines the VRF name.
host-ip
Specifies the IP address of the TACACS+ server in the
format a.b.c.d.
Note: Up to two TACACS+ servers may be defined.
port-num Specifies the TCP port number for the TACACS+ service.
password
Specifies the shared secret between the TACACS+ server
and the device.
seconds Specifies how much time to wait for a TACACS+ response
before failing the authentication.
obscured-key
Copies the TACACS+ shared secret from an existing
configuration.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English