AudioCodes Mediant MSBR Series User Manual

Reference Guide 384 Document #: LTRT-17939
Mediant MSBR
Command Description
npi {e164-public|not-
included|private|unkno
wn}
Defines the Numbering Plan Indicator (NPI).
num-of-digits-to-leave
Defines the number of digits that you want to retain from
the right of the redirect number.
prefix-to-add
Defines the number or string that you want added to the
front of the redirect number.
redirect-pattern
Defines the redirect telephone number prefix.
remove-from-left
Defines the number of digits to remove from the left of the
redirect number prefix.
remove-from-right
Defines the number of digits to remove from the right of the
redirect number prefix.
src-host-pattern
Defines the URI host name prefix of the caller.
src-ip-address
Defines the IP address of the caller.
suffix-to-add
Defines the number or string that you want added to the
end of the redirect number.
ton
{abbreviated|internati
onal-level2-
regional|national-
level1-
regional|network-pstn-
specific|not-
included|subscriber-
level0-
regional|unknown}
Defines the Type of Number (TON).
Command Mode
Privileged User
59.5.10 redirect-number-map-tel2ip
This command configures the Redirect Number IP-to-Tel table, which lets you define
manipulation rules for manipulating the redirect number received in SIP messages for IP-to-
Tel calls.
Syntax
(config-voip)# gateway manipulation redirect-number-map-tel2ip
<Index>
(redirect-number-map-tel2ip-<Index>)#
Command Description
dst-pattern
Defines the destination (called) telephone number prefix.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English