AudioCodes Mediant MSBR Series User Manual

Version 7.2 621 Mediant MSBR
Reference Guide 75. Layer-3 Commands
# configure data
(config-data)# qos match-map input mmap3
(conf-m-map)# set queue sip_queue
75.1.7.12 qos service-map
This command enters a specific service-map configuration.
Syntax
qos service-map lan input
qos service-map lan output
qos service-map gigabitethernet <slot/port> {input|output}
qos service-map atm <slot/port> {input|output}
qos service-map cellular <slot/port> {input|output}
qos service-map efm <slot/port> {input|output}
qos service-map serial <slot/port> {input|output}
qos service-map multilink <1-255> {input|output}
qos service-map fiber <slot/port> {input|output}
Command Description
input Defines inbound traffic
output Defines outgoing traffic
slot/port Defines the interface slot and port
Default
NA
Command Mode
Privileged User
Example
This example enters a LAN output service map.
(config-data)# qos service-map lan output
75.1.7.13 qos priority-retain
This command, when enabled, does not adjust 802.1p priority bits per the DSCP values.
Syntax
qos priority-retain
Default
NA

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English