Version 7.2 795 Mediant MSBR
Reference Guide 76 Security
Command Mode
Privileged User
Example
The example below enables TACACS+ usage for session accounting.
(config-data)# aaa accounting exec start-stop tacacs+
76.11.4 aaa authentication login tacacs+ allow-console-bypass
authentication
This command allows bypassing TACACS+ authentication when a user is connected using
the serial port. After login, non-privileged commands will be allowed without negotiating with
the TACACS+ Server. This does not affect TACACS+ users.
Syntax
aaa authentication login tacacs+ allow-console-bypass
authentication
Default
TACACS+ is disabled.
Command Mode
Privileged User
Example
The example below allows bypassing TACACS+ authentication when a user is connected
using the serial port.
(config-data)# aaa authentication login tacacs+ allow-console-
bypass authentication
76.11.5 aaa authentication login tacacs+ allow-console-bypass
authentication authorization
This command allows bypassing TACACS+ enable authorization (privileged mode) when a
user is connected using the serial port. After login, privileged commands will be allowed
without negotiating with the TACACS+ Server. This will not affect TACACS+ users.
Syntax
aaa authentication login tacacs+ allow-console-bypass
authentication authorization