AudioCodes Mediant MSBR Series

Reference Guide 5. Debug Commands
Version 7.2 83 Mediant MSBR
5.28 debug rmx-serial
This command configures serial debugging of the RMX (Real-Time Multitasking Executive)
real-time operating system, used with the Intel 8080 and 8086 family of processors.
Syntax
# debug rmx-serial
Command Description
clear-logs
Clears all logs.
copy-logs-usb
Copies all saved RMX logs to USB storage.
list-logs
Lists the saved RMX serial debug logs.
profile {current|
list-logs|read-log
<Number>}
CPU profiling logs:
 Current (Prints the currently run RMX CPU profiling
log)
 list-logs (Lists the saved RMX CPU profiling logs)
 read-log (Read the saved RMX CPU profiling log
according to the log's run number)
read-log <Number>
Reads the saved RMX serial debug log according to the
log's run number.
tap
Starts debugging the RMX serial Test Access Port (TAP).
Command Mode
Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example debugs the RMX's serial TAP:
# debug rmx-serial tap
[Start RMX serial tap]
Password: [1129554.457] cn3xxx_check_adsl:1394: @@@ interface adsl
0/2 Line State: 0x000000FF (Idle Request).
[1129556.463] cn3xxx_check_adsl:1394: @@@ interface adsl 0/2 Line
State: 0x00000200 (Silent).
[1129618.440] cn3xxx_check_adsl:1394: @@@ interface adsl 0/2 Line
State: 0x000000FF (Idle Request).
This example lists the saved RMX serial debug logs:
# debug rmx-serial list-logs
FILE SIZE
------------------------------ --------
log_160.txt 50024