Reference Guide 58 Document #: LTRT-17939
Mediant MSBR
5.6.1.8 debug capture data physical <interface>
This command records all traffic on the device's interfaces, saving the result in a PCAP-
format file (suitable for Wireshark) on a TFTP server. This command provides support for
debug capturing of Asynchronous Transfer Mode (ATM) packets over ADSL through the
ADSL/VDSL PHY (physical layer) chipset. It also supports ATM AAL5 (ATM Adaptation
Layer 5) and ATM OAMP cells.
Syntax
debug capture data physical <interface>
<interface> Description
cellular-wan Defines the cellular WAN interface.
eth-lan Defines LAN Ethernet interfaces.
eth-wan Defines WAN Ethernet interfaces.
fiber-wan Defines the WAN fiber interface.
xdsl-wan Defines any DSL interface (ADSL, VDSL) that is installed
on the MSBR.
Default
By default, capture is inactive.
Command Mode
Enable
Related Commands
NA
Examples:
The following example performs a network capture of both LAN and ADSL.
# debug capture data physical eth-lan
# debug capture data physical xdsl-wan
To Next Page
Loading...
Need help?
General
