EasyManuals Logo
Home>AudioCodes>Network Router>Mediant MSBR Series

AudioCodes Mediant MSBR Series User Manual

AudioCodes Mediant MSBR Series
801 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #411 background imageLoading...
Page #411 background image
Version 7.2 411 Mediant MSBR
Reference Guide 62. ip-group
62 ip-group
This command configures the IP Groups table, which lets you define IP Groups.
Syntax
(config-voip)# ip-group <Index>
(ip-group-<Index>)#
Command Description
always-use-route-table
{disable|enable}
Defines the Request-URI host name in outgoing INVITE
messages.
always-use-source-addr
{disable|enable}
Enables the <device> to always send SIP requests and
responses, within a SIP dialog, to the source IP address
received in the previous SIP message packet.
authentication-method-
list
Defines SIP methods received from the IP Group that must
be challenged by the <device> when the <device> acts as
an Authentication server.
authentication-mode
{sbc-as-client|sbc-as-
server|user-
authenticates}
Defines the authentication mode.
bandwidth-profile
Assigns a Bandwidth Profile rule.
cac-profile
Assigns a Call Admission Control Profile.
call-setup-rules-set-
id
Assigns a Call Setup Rule Set ID to the IP Group.
classify-by-proxy-set
{disable|enable}
Enables classification of incoming SIP dialogs (INVITEs) to
Server-type IP Groups based on Proxy Set (assigned
using the IPGroup_ProxySetName parameter).
contact-user
Defines the user part of the From, To, and Contact
headers of SIP REGISTER messages, and the user part of
the Contact header of INVITE messages received from this
IP Group and forwarded by the <device> to another IP
Group.
dst-uri-input
Defines the SIP header in the incoming INVITE to use as a
call matching characteristic based on destination URIs.
dtls-context
Assigns a TLS Context (certificate) to the IP Group, which
is used for DTLS sessions (handshakes) with the IP
Group.
inbound-mesg-
manipulation-set
Assigns a Message Manipulation Set (rule) to the IP Group
for SIP message manipulation on the inbound leg.
ip-profile-name
Assigns an IP Profile to the IP Group.
local-host-name
Defines the host name (string) that the <device> uses in
the SIP message's Via and Contact headers.
max-num-of-reg-users
Defines the maximum number of users in this IP Group
that can register with the <device>.

Table of Contents

Other manuals for AudioCodes Mediant MSBR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant MSBR Series and is the answer not in the manual?

AudioCodes Mediant MSBR Series Specifications

General IconGeneral
BrandAudioCodes
ModelMediant MSBR Series
CategoryNetwork Router
LanguageEnglish

Related product manuals