AudioCodes Mediant MSBR Series User Manual

Reference Guide 298 Document #: LTRT-17939
Mediant MSBR
42.1 dns dns-to-ip
This command configures the Internal DNS table, which lets you resolve hostnames into IP
addresses.
Syntax
(config-network)# dns dns-to-ip <Index>
(dns-to-ip-<Index>)#
Command Description
domain-name
Configures the host name to be translated.
first-ip-address
Configures the first IP address (in dotted-decimal format
notation) to which the host name is translated.
second-ip-address
Configures the second IP address (in dotted-decimal
format notation) to which the host name is translated.
third-ip-address
Configures the third IP address (in dotted-decimal format
notation) to which the host name is translated.
Command Mode
Privileged User
Example
This example configures the domain name "proxy.com" with a resolved IP address of
210.1.1.2:
(config-network)# dns dns-to-ip 0
(dns-to-ip-0)# domain-name proxy.com
(dns-to-ip-0)# first-ip-address 210.1.1.2

AudioCodes Mediant MSBR Series Specifications

General

Product Series	Mediant MSBR Series
Category	Network Router
VoIP Protocols	SIP, H.323
Fax Support	T.38, G.711 pass-through
Integrated Firewall	Yes
VPN Support	IPSec, L2TP, PPTP
Management	Web GUI, CLI, SNMP, TR-069
FXS Ports	Up to 8
FXO Ports	Up to 2
Voice Codecs	G.711, G.729, G.723.1
Router Features	NAT, DHCP, QoS
Security Features	Firewall, DoS protection
Redundancy	Optional
Dimensions	1U Rack Mountable
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70 °C
Humidity	Up to 95% non-condensing