AudioCodes Mediant MSBR Series

Reference Guide 380 Document #: LTRT-17939
Mediant MSBR
Syntax
(config-voip)# gateway manipulation cause-map-isdn2sip <Index>
(cause-map-isdn2sip-<Index>)#
Command Description
q850-causes
Defines the ISDN Q.850 cause code.
sip-response
Defines the SIP response code.
Command Mode
Privileged User
Example
This example maps ISDN cause code 6 to SIP code 406:
(config-voip)# gateway manipulation cause-map-isdn2sip 0
(cause-map-isdn2sip-0)# q850-causes 6
(cause-map-isdn2sip-0)# sip-response 406
(cause-map-isdn2sip-0)# activate
59.5.5 cause-map-sip2isdn
This command configures the Release Cause Mapping from SIP to ISDN table, which lets
you define SIP response code to ISDN ITU-T Q.850 release cause code (call failure) mapping
rules.
Syntax
(config-voip)# gateway manipulation cause-map-sip2isdn <Index>
(cause-map-sip2isdn-<Index>)#
Command Description
q850-causes
Defines the ISDN Q.850 cause code.
sip-response
Defines the SIP response code.
Command Mode
Privileged User
Example
This example maps SIP code 406 to ISDN cause code 6:
(config-voip)# gateway manipulation cause-map-sip2isdn 0
(cause-map-sip2isdn-0)# q850-causes 6
(cause-map-sip2isdn-0)# sip-response 406
(cause-map-sip2isdn-0)# activate