AudioCodes Mediant MSBR Series User Manual

Version 7.2 381 Mediant MSBR
Reference Guide 59. gateway
59.5.6 dst-number-map-ip2tel
This command configures the Destination Phone Number Manipulation for IP-to-Tel Calls
table, which lets you define manipulation rules for manipulating the destination number for
IP-to-Tel calls.
Syntax
(config-voip)# gateway manipulation dst-number-map-ip2tel <Index>
(dst-number-map-ip2tel-<Index>)#
Command Description
dst-host-pattern
Defines the Request-
URI host name prefix of the incoming
SIP INVITE message.
dst-pattern
Defines the destination (called) telephone number prefix
and/or suffix.
is-presentation-
restricted
Enables caller ID.
manipulation-name
Defines a descriptive name, which is used when
associating the row in other tables.
npi
Defines the Numbering Plan Indicator (NPI).
num-of-digits-to-leave
Defines the number of digits that you want to keep from
the right of the phone number.
prefix-to-add
Defines the number or string that you want added to the
front of the telephone number.
remove-from-left
Defines the number of digits to remove from the left of the
telephone number prefix.
remove-from-right
Defines the number of digits to remove from the right of the
telephone number prefix.
src-host-pattern
Defines the URI host name prefix of the incoming SIP
INVITE message in the From header.
src-ip-address
Defines the source IP address of the caller.
src-ip-group-name
Defines the IP Group to where the call is sent.
src-pattern
Defines the source (calling) telephone number prefix
and/or suffix.
suffix-to-add
Defines the number or string that you want added to the
end of the telephone number.
ton
Defines the Type of Number (TON).
Command Mode
Privileged User

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English