Reference Guide 664 Document #: LTRT-17939
Mediant MSBR
Interface Type (ifname) Interface ID
cellular Cellular interface ID 0/0
gre Tunnel GRE ID [1-255]
ipip Tunnel IPIP ID [1-255]
l2tp L2TP ID [0-99]
pppoe PPPoE interface ID [1-3]
pptp PPTP ID [0-99]
vlan Vlan ID [1-3999]
loopback Loopback ID [1-5]
bvi Bridge interface [1-255]
Default
NA
Command Mode
Privileged User
Example
This example specifies the IPv4 source address to use.
(config-data)# router bgp 1
(conf-router)# neighbor 192.168.0.1 update-source vlan2
75.2.2.49 neighbor unsuppress-map
This command selectively advertises routes that were previously suppressed by the
aggregate-address command.
Syntax
neighbor {<neighbor tag>|a.b.c.d|X:X::X:X} unsuppress-map <map
name>
Command Description
a.b.c.d|X:X::X:X Defines the IP address of the neighbor (IPv4 or IPv6).
map name Defines the name of the route map.
neighbor tag Defines the neighbor tag.
Default
NA
To Next Page
Loading...
