AudioCodes Mediant MSBR Series

Reference Guide 786 Document #: LTRT-17939
Mediant MSBR
76.8.4 authentication dot1x
This command determines which client (based on MAC address) is allowed through a
specific port after 802.1X authentication succeeds.
Syntax
authentication dot1x {single-host|multi-host}
Command Description
single-host Allows only the MAC address that successfully
passed 802.1x authentication.
multi-host A
ny MAC address is allowed after 802.1x
authentication succeeds.
Note
The command is relevant for LAN interfaces only.
Command Mode
Privileged User
Example
The following is an example using this command.
(config-data)# interface GigabitEthernet 0/1
(conf-if-GE 0/1)# authentication dot1x single-host