AudioCodes Mediant MSBR Series

Reference Guide 6. Show Commands
Version 7.2 119 Mediant MSBR
6.3.19 show data ip
This command displays configured access lists.
Syntax
show data ip
Command Description
access-list
Configures the name or number of the
access-list to display.
arp <vrf>
Displays the Address Resolution Protocol
(ARP) table entries.
 vrf (Displays ARP entries for a
specified VRF table)
as-path-access-list
<Name of AS
Path>
Displays the as-path access list.
bgp {neighbors <IP address>
|summary|vrf}
Displays information about Border
Gateway Protocol (BGP) processing.
 neighbors <IP address> (Displays
detailed information about the
neighbor router)
 summary (Displays a summary of BGP
neighbor status)
 vrf (Displays BGP status information
for a specified VRF table)
captive-portal
Displays information about the Captive
Portal server.
community-list
Displays information about the current
community list. When number or name is
specified, information about the specified
community list is displayed.
connections
{all|brief|interface|
port|queue|summary|top}
Displays the data router IP network
connections.
 all (Displays All IP connections)
 brief (Displays IP connection
summary)
 interface (Displays from a specific
interface)
 port (Displays IP connections on a
specific port)
 queue (Displays IP connections on a
specific QOS queue)
 summary (Displays a summary of IP
connections by ports)
 top (Displays the last IP connections)
dhcp {binding|pool|zone}
Displays the items in the DHCP database.
 binding (Displays DHCP address
bindings)