AudioCodes Mediant MSBR Series

Version 7.2 525 Mediant MSBR
Reference Guide 73. WAN Access Commands
Command Mode
Privileged User
Example
This example sets the framing method to superframe (D4) on t1 port 0/0:
(conf-if-t1 0/0)# framing-method sf
73.4.14.4 line-code
This command specifies the line coding on the current T1 interface.
Syntax
line-code <line code>
Command Description
<line code> Defines the line code:
 ‘ami’ – Alternate Mark Inversion encoding

‘b8zs’ – Bipolar Eight Zero Substitution encoding
Default
By default, the framing method is ‘bz8s’.
Command Mode
Privileged User
Example
This example sets the line code to ‘ami’ on t1 port 0/1:
(conf-if-t1 0/1)# line-code ami
73.4.14.5 line-buildout-loss
This command specifies the buildout loss on the current T1 interface.
Syntax
line-buildout-loss <loss>
Command Description
<loss> Defines the line buildout loss [dB]:
 0 dB
 -7.5 dB
 -15 dB