Version 7.2 263 Mediant MSBR
Reference Guide 29. Introduction
29 Introduction
This part describes the commands located on the Troubleshoot configuration level. The
commands of this level are accessed by entering the following command at the root prompt:
Syntax
# configure troubleshoot
(config-troubleshoot)#
This level includes the following commands:
activity-log (see Section 30)
activity-trap (see Section 31)
cdr (see Section 32)
fax-debug (see Section 33)
logging (see Section 34)
pstn-debug (see Section 35)
syslog (see Section 36)
test-call (see Section 37)