AudioCodes Mediant MSBR Series User Manual

Reference Guide 504 Document #: LTRT-17939
Mediant MSBR
Syntax
phone <phone-string>
Default
The default phone number is “*99#”.
Command Mode
Privileged User
Example
This example sets the phone number:
(config-data)# interface cellular 0/0
(conf-cellular)# phone *99#
73.2.5 initstr
This command sets the initialization string for the cellular modem and is available in the “conf-
cellular” configuration context.
Syntax
initstr <init-string>
Default
The default initialization string is “AT&F”.
Command Mode
Privileged User
Example
This example sets the initialization string:
(config-data)# interface cellular 0/0
(conf-cellular)# initstr ATC0D0
73.2.6 tty
This command selects the serial instance (TTY) for the cellular modem. Most modems
provide multiple serial interfaces for diagnostic purposes, usually only one is appropriate for
Internet access.
Setting “tty first” will use the first responsive serial interface. Setting “tty last” will use the
highest numbered interface (default). Alternatively, a serial interface can be selected by
number.
The recommended setting for Sierra Wireless 308 modems is "tty 2".
The recommended setting for Huawei E160 / E182E modems is "tty 0".
The recommended setting for all other modems is the default "tty last".
This command is available in the “conf-cellular” configuration context.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English