AudioCodes Mediant MSBR Series User Manual

Reference Guide 6. Show Commands
Version 7.2 153 Mediant MSBR
Example
show system radius servers status
servers 0
ip-address 10.4.4.203
auth-port 1812
auth-ha-state "ACTIVE"
acc-port 1813
acc-ha-state "ACTIVE"
servers 1
ip-address 10.4.4.202
auth-port 1812
auth-ha-state "STANDBY"
acc-port 1813
acc-ha-state "STANDBY"
This example shows the following fields per server:
 If the authentication port is 0, the server is not part of the redundancy server selection
for authentication.
 If the accounting port is 0, the server is not part of the redundancy server selection for
accounting.
 Server authentication redundancy (HA) status. ACTIVE = the server was used for the
last sent authentication request.
 Server accounting redundancy (HA) status. ACTIVE = the server was used for the last
sent accounting request.
6.10.13 show system uptime
This command displays the device's uptime (time since last restarted).
Syntax
show system uptime
Command Mode
Basic User and Privileged User
Example
show system uptime
Uptime: 3 days, 0 hours, 55 minutes, 46 seconds
6.10.14 show system utilization
This command displays the device's CPU and memory utilization for the Voice application
and the Data-Router application (in percentage).
Syntax
show system utilization

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English