AudioCodes Mediant MSBR Series - Reject-Anonymous-Calls; Tone-Index

Reference Guide 364 Document #: LTRT-17939
Mediant MSBR
59.2.13 reject-anonymous-calls
This command configures the Reject Anonymous Call Per Port table, which lets the device
reject incoming anonymous calls per FXS port.
Syntax
(config-voip)# gateway analog reject-anonymous-calls <Index>
(reject-anonymous-calls-<Index>)#
Command Description
reject-calls
{disable|enable}
Enables rejection of anonymous calls.
Command Mode
Privileged User
Note
To view the port-module numbers and port type, enter the display command at the index
prompt, for example:
(reject-anonymous-calls-0)# display
Example
This example configures metering tone to be based the Charge Codes table:
(config-voip)# gateway analog reject-anonymous-calls 0
(reject-anonymous-calls-0)# reject-calls enable
(reject-anonymous-calls-0)# activate
59.2.14 tone-index
This command configures the Tone Index table, which lets you define distinctive ringing tones
and call waiting tones per calling (source) and called (destination) number (or prefix) for IP-
to-Tel calls.
Syntax
(config-voip)# gateway analog tone-index <Index>
(tone-index-<Index>)#
Command Description
dst-pattern Defines the prefix of the called number.
fxs-port-first Configures the first port in the FXS port range.
fxs-port-last Configures the last port in the FXS port range.
priority Defines the index of the distinctive ringing and call waiting
tones.