AudioCodes Mediant MSBR Series

Reference Guide 100 Document #: LTRT-17939
Mediant MSBR
6.3.4 show data bfd neighbors
This command displays details about Bidirectional Forwarding Detection (BFD) neighbors.
Syntax
show data bfd neighbors
Command Description
details [vrf <VRF
Table Name>]
Displays detailed status of all configured BFD neighbors
or, optionally, of a specified VRF table.
vrf <VRF Table
Name>
Displays the status of configured BFD neighbors for a
specified VRF table.
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays the status of all configured BFD neighbors:
show data neighbors details
VRF main-vrf
Protocol Codes: S - Static, O - OSPF
Proto NeighAddr Holdown(mult) RH/RS State Int
1 S 192.168.110.10 600(3) Up Up VLAN 2
OutAddr: 192.168.100.254
Local Diag: 1, Demand mode: 0, Poll bit: 0
MinTxInt: 200000, MinRxInt: 200000, Multiplier: 3
Received MinRxInt: 200000, Received Multiplier: 3
Holdown (hits): 600(1), Hello (hits): 200(4575)
Rx Count: 4575
Tx Count: 4578
Last packet: Version: 1 - Diagnostic: 3
State bit: Up - Demand bit: 0
Poll bit: 0 - Final bit: 0
Multiplier: 3 - Length: 24
My Discr: 1 - Your Discr: 51
Min tx interval: 200000 - Min rx interval: 200000
Min Echo interval: 0