AudioCodes Mediant MSBR Series - Spanning-Tree Edge; Spanning-Tree Point-To-Point

Reference Guide 594 Document #: LTRT-17939
Mediant MSBR
74.4.2.4 spanning-tree edge
This command sets the edge configuration of the interface.
Syntax
spanning-tree edge auto
spanning-tree edge enable
spanning-tree edge disable
Command Description
auto/enable/disable Defines the value as:
• auto – auto detect
• enable – enable edge
•
disable – disable edge
Default
NA
Command Mode
Privileged User
Example
This example sets the unit edge to ‘auto’:
(conf-if-FE 5/1)# spanning-tree edge auto
74.4.2.5 spanning-tree point-to-point
This command sets the point-to-point configuration of the interface.
Syntax
spanning-tree point-to-point auto
spanning-tree point-to-point enable
spanning-tree point-to-point disable
Command Description
auto/enable/disable Defines the value as:
• auto – auto detect
• enable – enable point-to-point
•
disable – disable point-to-point
Default
NA