AudioCodes Mediant MSBR Series User Manual

Version 7.2 425 Mediant MSBR
Reference Guide 64. message
64 message
This command configures SIP message manipulation tables.
Syntax
(config-voip)# message
Command Description
call-setup-rules
See Section 64.1.
message-manipulations
See Section 64.2.
message-policy
See Section 64.3.
pre-parsing-manip-sets
See Section 64.4.
Command Mode
Privileged User
64.1 call-setup-rules
This command configures the Call Setup Rules table, which lets you define Call Setup rules.
Call Setup rules define various sequences that are run upon the receipt of an incoming call
(dialog) at call setup, before the device routes the call to its destination.
Syntax
(config-voip)# message call-setup-rules <Index>
(call-setup-rules-<Index>)#
Command Description
action-subject
Defines the element (e.g., SIP header, SIP parameter, SIP
body, or Dial Plan tag) upon which you want to perform the
action if the condition, configured in the 'Condition'
parameter (see above) is met.
action-type {add|add-
prefix|add-
suffix|exit|modify|rem
ove|remove-
prefix|remove-
suffix|run-rules-set}
Defines the type of action to perform.
action-value
Defines a value that you want to use in the action.
attr-to-get
Defines the Attributes of the queried LDAP record that the
<device> must handle (e.g., retrieve value).
attr-to-query
Defines the key to query.
condition
Defines the condition that must exist for the <device> to
perform the action.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English