Reference Guide 382 Document #: LTRT-17939
Mediant MSBR
59.5.7 dst-number-map-tel2ip
This command configures the Destination Phone Number Manipulation for IP-to-Tel Calls
table, which lets you define manipulation rules for manipulating the destination number for
Tel-to-IP calls.
Syntax
(config-voip)# gateway manipulation dst-number-map-tel2ip <Index>
(dst-number-map-tel2ip-<Index>)#
Command Description
Defines the IP Group to where the call is sent.
dst-pattern
Defines the destination (called) telephone number prefix
and/or suffix.
is-presentation-
Enables caller ID.
manipulation-name
Defines a descriptive name, which is used when
associating the row in other tables.
Defines the Numbering Plan Indicator (NPI).
num-of-digits-to-leave
Defines the number of digits that you want to keep from
the right of the phone number.
prefix-to-add
Defines the number or string that you want added to the
front of the telephone number.
remove-from-left
Defines the number of digits to remove from the left of the
telephone number prefix.
remove-from-right
Defines the number of digits to remove from the rig
telephone number prefix.
src-pattern
Defines the source (calling) telephone number prefix
and/or suffix.
Defines the source Trunk Group for Tel-to-IP calls.
suffix-to-add
Defines the number or string that you want added to the
end of the telephone number.
Defines the Type of Number (TON).
Command Mode
Privileged User
59.5.8 phone-context-table
This command configures the Phone Contexts table, which lets you define rules for mapping
the Numbering Plan Indication (NPI) and Type of Number (TON) to the SIP 'phone-context'
parameter, and vice versa.
To Next Page
Loading...
