Version 7.2 605 Mediant MSBR
Reference Guide 75. Layer-3 Commands
75.1.4 Acquiring IPv6 Address from Router Advertisement
75.1.4.1 ipv6 address autoconfig
This command provides support for automatically acquiring an IPv6 address using stateless
auto-configuration on a specified WAN interface. This is instead of using a DHCPv6 server
for acquiring an IPv6 address.
Syntax
# ipv6 address autoconfig
Note
This command is applicable only to data-router functionality.
Command Mode
Privileged User
Example
This example automatically acquires an IPv6 address.
(config-data)# interface gigabitethernet 0/0
(conf-if-GE 0/0)# ipv6 address autoconfig
To Next Page
Loading...
Need help?
General
