AudioCodes Mediant MSBR Series User Manual

Version 7.2 585 Mediant MSBR
Reference Guide 74. Layer-2 (LAN) Commands
74.2.11 ip reassembly
This command defragments received fragmented IP packets from an interface and then
reassembles the packets before forwarding them. The Wireshark packet analyzer is typically
used to identify fragmented frames.
This capability is applied per interface and therefore, the CLI command must be set for the
relevant IP interface. By default, this capability is disabled per interface.
Syntax
ip reassembly
no ip reassembly
Note
This command is applicable only to data-router functionality.
Command Mode
Privileged User
Example
The following is an example of how this command can be used.
(config-data)# interface gigabitethernet 0/0
(conf-if-GE 0/0)# ip reassembly

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English