AudioCodes Mediant MSBR Series User Manual

Reference Guide 5. Debug Commands
Version 7.2 59 Mediant MSBR
5.6.2 debug capture trim
This command trims captured network traffic for USB captures.
Syntax
# debug capture trim {in-file <File>|offset <Time>}
Command Description
in-file
Trims captured traffic. Uses the existing file on USB
storage.
offset
After a capture has been saved on an attached USB
stick, you can trim the capture to include only a relevant
time-slice. The command is useful when fetching a large
capture file via SSH over a slow network connection.
Offset is from the start of the capture, in
hours:minutes:seconds.
Example
Offsetting 1 hour 20 minutes from start of capture to trim captured USB traffic:
debug capture trim offset 00:01:20
5.6.3 debug capture voip
This command captures network traffic on VoIP network interfaces.
Syntax
# debug capture voip {interface|physical}
Command Description
interface
Captures network traffic on one of the VoIP sub-system
network interfaces. See Section 5.6.3.1
physical
Captures traffic on the wire. See Section 5.6.3.2

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English