AudioCodes Mediant MSBR Series User Manual

Reference Guide 452 Document #: LTRT-17939
Mediant MSBR
Command Description
remove-from-right
Defines the number of digits to remove from the right of the
manipulated item prefix.
request-type
{all|invite|invite-
and-register|invite-
and-
subscribe|register|sub
scribe}
Defines the SIP request type to which the manipulation
rule is applied.
routing-policy-name
Assigns a Routing Policy to the rule.
src-host
Defines the source SIP URI host name - full name,
typically in the From header.
src-ip-group-name
Defines the IP Group from where the INVITE is received.
src-tags
Assigns a prefix tag to denote source URI user names
corresponding to the tag configured in the associated Dial
Plan.
src-user-name-pattern
Defines the prefix of the source SIP URI user name,
typically used in the SIP From header.
suffix-to-add
Defines the number or string to add at the end of the
manipulated item.
trigger {3xx|3xx-or-
refer|any|initial-
only|refer}
Defines the reason (i.e., trigger) for the re-routing of the
SIP request.
Command Mode
Privileged User
Example
This example configures an Outbound Manipulation rule that removes two digits from the
right of the destination URI if the calling name prefix is "WEI":
(config-voip)# sbc manipulation ip-outbound-manipulation 0
(ip-outbound-manipulation-0)# manipulation-name ITSP-OOUTMAN
(ip-outbound-manipulation-0)# calling-name-pattern WEI
(ip-outbound-manipulation-0)# manipulated-uri destination
(ip-outbound-manipulation-0)# remove-from-right 2
(ip-outbound-manipulation-0)# activate
68.6 routing
This command configures SBC routing.
Syntax
(config-voip)# sbc routing

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English