Version 7.2 481 Mediant MSBR
Reference Guide 70. sip-interface
70 sip-interface
This command configures the SIP Interfaces table, which lets you define SIP Interfaces. A
SIP Interface represents a Layer-3 network in your deployment environment, by defining a
local, listening port number and type (e.g., UDP), and assigning an IP network interface for
SIP signaling traffic.
Syntax
(config-voip)# sip-interface <Index>
(sip-interface-<Index>)#
Command Description
additional-udp-ports
Defines a port range for the <device>'s local, listening and
source ports for SIP signaling traffic over UDP and is used
to assign a specific local port to each SIP entity (e.g., PBX)
communicating with a common SIP entity (e.g., proxy
server).
application-type
Defines the application for which the SIP Interface is used.
block-un-reg-users
{acpt-all|acpt-reg-
users|acpt-reg-users-
Defines the blocking (reject) policy for incoming SIP dialog
initiating requests (e.g., INVITE message
and unregistered users belonging to the SIP Interface.
Assigns a Call Admission Control Profile.
classification_fail_re
sponse_type
Defines the SIP response code that the <device> sends if
a received SIP request (OPTIONS, REGISTER, or
INVITE) fails the SBC Classification process.
enable-un-auth-
registrs
{disable|enable|not-
conf}
Enables the <device> to accept REGISTER requests and
register them in its registration database from new users
that have not been authenticated by a proxy/registrar
server (due to proxy down) and thus, re-routed to a User-
type IP Group.
encapsulating-protocol
Defines the type of incoming traffic (SIP messages)
expected on the SIP Interface.
interface-name
Defines a descriptive name, which is used when
associating the row in other tables.
max-reg-users
Defines the maximum number of users belonging to the
SIP Interface that can register with the <device>.
Assigns a Media Realm to the SIP Interface.
Assigns a SIP message policy to the SIP interface.
network-interface
Assigns a Control-type IP network interface to the SIP
Interface.
pre-classification-
Assigns a Message Manipulation Set ID to the SIP
Interface.
pre-parsing-man-set
Assigns a Pre-Parsing Manipulation Set to the SIP
Interface. T