AudioCodes Mediant MSBR Series User Manual

Reference Guide 614 Document #: LTRT-17939
Mediant MSBR
Command Description
< bandwidth in kbps > Defines the maximum bandwidth of the service-map.
unlimited Defines the bandwidth is unlimited.
automatic Defines the bandwidth is set automatically.
Default
NA
Command Mode
Privileged User
Example
This example configures the wan output service map maximum bandwidth to 100000 kbps.
(conf-s-map)# bandwidth 100000
75.1.7.3 qos match-map
This command enters a specific match-map configuration. Use the no form of this command
to delete a specific match-map.
Syntax
qos match-map input <match-map name>
qos match-map output <match-map name>
qos match-map input <match-map name> <interface type> <interface
ID>
qos match-map output <match-map name> <interface type> <interface
ID>
Command Description
match-map name Defines the name of the match map to configure
interface name Defines the interface naming on the interface command.
If not chosen,
match-map
will apply to all interfaces.
Interface Type (ifname) Interface ID
gigabitethernet GigabitEthernet interface slot
and port (VLAN ID is optional)
[SLOT/PORT.VLANID]
cellular Cellular interface ID 0/0
gre Tunnel GRE ID [1-255]
ipip Tunnel IPIP ID [1-255]
l2tp L2TP ID [0-99]

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English