Reference Guide 618 Document #: LTRT-17939
Mediant MSBR
Examples:
This example configures the match-map to match traffic with data length between 40 to 150
bytes.
(conf-m-map)# match length data 40 150
75.1.7.8 match dscp
This command defines the dscp to match on the specified match-map. Use the no form of
this command to remove a match dscp.
Syntax
match dscp ef
match dscp default
match dscp cs7
match dscp cs6
match dscp cs5
match dscp cs4
match dscp cs3
match dscp cs2
match dscp cs1
match dscp af43
match dscp af42
match dscp af41
match dscp af33
match dscp af32
match dscp af31
match dscp af23
match dscp af22
match dscp af21
match dscp af13
match dscp af12
match dscp af11
match dscp <dscp value>
Command Description
ef Matches packets with EF dscp (101110)
default Matches packets with default dscp (000000)
cs7 Matches packets with CS7(precedence 7) dscp (111000)
cs6 Matches packets with CS6(precedence 6) dscp (110000)
cs5 Matches packets with CS5(precedence 5) dscp (101000)
cs4 Matches packets with CS4(precedence 4) dscp (100000)
cs3 Matches packets with CS3(precedence 3) dscp (011000)
cs2 Matches packets with CS2(precedence 2) dscp (010000)
cs1 Matches packets with CS1(precedence 1) dscp (001000)
af43 Matches packets with AF43 dscp (100110)
af42 Matches packets with AF42 dscp (100100)