Version 7.2 289 Mediant MSBR
Reference Guide 40. bind vrf
40 bind vrf
This command provides support for binding the management servers (Web HTTP and
HTTPS, Telnet, SSH, and SNMP) to a network source which can be a defined VRF, source
address, or network interface.
Syntax
bind vrf <VRF Name> management-servers [Server Name]
bind vrf all-vrfs management-servers [Server Name]
bind source-address interface <Interface ID> management-servers
[Server Name]
bind interface <Interface ID> management-servers [Server Name]
Arguments Description
VRF Name Defines the VRF name.
Interface ID Defines the interface ID.
Server name Management server that binds to network source. Available
servers to bind are:
• http
• https
• snmp
• ssh
• telnet
If no server is specified, all management servers will be bind.
Default
Main VRF (default routing table)
Command Modes
Enable
Example
To bind all management servers to all VRFs:
(config-network)# bind vrf all-vrfs management-servers
To bind the SNMP management server to the source address of VLAN 1 interface:
(config-network)# bind source-address interface vlan 1
management-servers snmp
To remove an existing bind (return to default bind), use the no command:
(config-network)# no bind source-address interface vlan 1
management-servers snmp
To Next Page
Loading...
