AudioCodes Mediant MSBR Series User Manual (English)

To Next Page

To Previous Page

Version 7.2 773 Mediant MSBR

Reference Guide 76 Security

(config-std-nacl)# 1 permit any

76.5.5 ip access-list resequence

This command re-sequences rule numbering of a specific Access List.

Syntax

ip access-list resequence <access list id> <starting rule number>

Command Description

access list id Defines the Starting Rule Number. The range is 1-2147483647.

Note

This command is applicable only to data-router functionality.

Command Mode

Privileged User

Example

This example shows a configuration of Access List ID 1 with two rules (numbers 10 and 20):

(config-data)# ip access-list standard 1

(config-std-nacl)# 10 permit any

(config-std-nacl)# 20 permit host 3.3.3.3

To change the order of the rules so that the first rule is assigned number 100 and subsequent

rules are assigned numbers incremented by 50:

(config-data)# ip access-list resequence 1 100 50

To view the rules and their changed sequence numbers:

# show data access-lists

…

Standard IP access list 1

1 100 permit any (0 matches)

1 150 permit host 3.3.3.3 (0 matches)

Other manuals for AudioCodes Mediant MSBR Series

Need help?

Do you have a question about the AudioCodes Mediant MSBR Series and is the answer not in the manual?

General