AudioCodes Mediant MSBR Series

Version 7.2 343 Mediant MSBR
Reference Guide 58. coders-and-profiles
Command Mode
Privileged User
Example
This example configures the Allowed Video Coders table with G.711:
(config-voip)# coders-and-profiles allowed-video-coders-groups 0
(allowed-video-coders-groups-0)# allowed-video-coders 1
(allowed-video-coders-0/1)# user-defined-coder mpeg2
(allowed-video-coders-0/1)# activate
58.2.1 allowed-video-coders-groups
This command configures the Allowed Video Coders Groups table, which lets you define
Allowed Video Coders Groups for SBC calls. The table is a "parent" of the Allowed Video
Coders table.
Syntax
(config-voip)# coders-and-profiles allowed-video-coders-groups
<Index>
(allowed-video-coders-groups-<Index>)#
Command Description
coders-group-name
Defines a name for the Allowed Video Coders Group.
Command Mode
Privileged User
Example
This example configures the name "ITSP" for the Allowed Video Coders Group:
(config-voip)# coders-and-profiles allowed-video-coders-groups 0
(allowed-video-coders-groups-0)# coders-group-name ITSP
(allowed-video-coders-groups-0)# activate
58.3 audio-coders-groups
This command configures the Audio Coders Groups table, which lets you define Audio
Coders Groups. The table is a "parent" of the Coder Groups table.
Syntax
(config-voip)# coders-and-profiles audio-coders-groups <Index>
(audio-coders-groups-<Index>)#