AudioCodes Mediant MSBR Series - 34 Logging; Logging-Filters

Version 7.2 275 Mediant MSBR
Reference Guide 34. logging
34 logging
This command configures logging and includes the following subcommands:
 logging-filters (see Section 34.1)
 settings (see Section 34.2)
34.1 logging-filters
This command configures the Logging Filters table.
Syntax
(config-troubleshoot)# logging logging-filters <Index>
(logging-filters-<Index>)#
Command Description
filter-type
{any|classification|fxs-
fxo|ip-group|ip-to-ip-
routing|ip-to-tel|ip-
trace|sip-interface|srd|tel-
to-ip|trunk-bch|trunk-group-
id|trunk-id|user}
Type of logging filter.
log-dest {debug-rec|local-
storage|syslog}
Log destination.
log-type {cdr-only|none|pstn-
trace|signaling|signaling-
media|signaling-media-pcm}
Log type.
mode {disable|enable}
Enables or disables the log rule.
value
Value of log filter (string).
Command Mode
Privileged User
Example
This example configures a Logging Filter rule (Index 0) that sends SIP signaling syslog
messages of IP Group 1 to a Syslog server:
(config-troubleshoot)# logging logging-filters 0
(logging-filters-0)# filter-type ip-group
(logging-filters-0)# log-dest syslog
(logging-filters-0)# log-type signaling
(logging-filters-0)# mode enable
(logging-filters-0)# value 1