Reference Guide 764 Document #: LTRT-17939
Mediant MSBR
76.3.2.8 ppp authentication pap|chap|ms-chap|ms-chap-v2
This command enables several authentication protocols on the ppp protocol of the
specified tunnel interface. Use the no form of this command to disable a specific
authentication protocol.
Syntax
ppp authentication pap
ppp authentication chap
ppp authentication ms-chap
ppp authentication ms-chap-v2
Command Description
pap Defines the Password Authentication Protocol.
chap
Defines the Challenge Handshake Authentication
Protocol.
ms-chap
Defines the Microsoft Challenge Handshake
Authentication Protocol.
ms-chap-v2
Defines the Microsoft Challenge Handshake
Authentication Protocol - Version 2.
Default
By default, all protocols are enabled.
Command Mode
Privileged User
Example
This example disable the pap protocol on interface l2tp 3.
(conf-if-L2TP 3)# no ppp authentication pap
76.3.2.9 shutdown
This command disables the specified interface. Use the no form of this command to enable
the interface.
Syntax
shutdown
no shutdown
No arguments exist for this command.