AudioCodes Mediant MSBR Series - Caller-Display-Info

Version 7.2 357 Mediant MSBR
Reference Guide 59. gateway
Command Description
enable-call-waiting
{disable|enable|not-
configure}
Enables call waiting for the port.
Command Mode
Privileged User
Note
To view the port-module numbers and port type, enter the display command at the index
prompt, for example:
(call-waiting-0)# display
Example
This example enables call waiting:
(config-voip)# gateway call-waiting 0
(call-waiting-0)# enable-call-waiting enable
(call-waiting-0)# activate
59.2.5 caller-display-info
This command configures the Caller Display Information table, which lets you define caller
identification strings (Caller ID) per FXS and FXO port.
Syntax
(config-voip)# gateway analog caller-display-info <Index>
(caller-display-info-<Index>)#
Command Description
display-string
Defines the Caller ID string.
presentation
{allowed|restricted}
Enables the sending of the caller ID string.
Command Mode
Privileged User
Note
To view the port-module numbers and port type, enter the display command at the index
prompt, for example:
(caller-display-info-0)# display