Reference Guide 6. Show Commands
Version 7.2 137 Mediant MSBR
6.4 show ini-file
This command displays the device's current configuration in ini-file format.
Syntax
show ini-file
Command Mode
Basic User and Privileged User
Example
show ini-file
;**************
;** Ini File **
;**************
;Board: Mxx
;HW Board Type: 69 FK Board Type: 84
;Serial Number: 8906721
;Customer SN:
;Slot Number: 1
;Software Version: 7.20A.140.586
;DSP Software Version: 5011AE3_R => 721.09
;Board IP Address: 192.168.0.2
;Board Subnet Mask: 255.255.255.0
;Board Default Gateway: 192.168.0.1
;Ram size: 512M Flash size: 128M Core speed: 300Mhz
;Num of DSP Cores: 1 Num DSP Channels: 30
;Num of physical LAN ports: 4
;Profile: NONE
;;;Key features:;Board Type: M500L ;Security: IPSEC
MediaEncryption StrongEncryption EncryptControlProtocol ;Eth-
Port=32 ;DATA features: Routing FireW
all&VPN WAN BGP Advanced-Routing 3G FTTX-WAN T1E1-Wan-Trunks=2
;DSP Voice features: ;Channel Type: DspCh=30 ;E1Trunks=4
;T1Trunks=4 ;FXSPorts=4 ;FXOPo
rts=4 ;Control Protocols: MGCP MEGACO H323 SIP SBC=4 ;Default
features:;Coders: G711 G726;
;------ HW components------
;
; Slot # : Module type : # of ports
;----------------------------------------------
; 2 : FXS : 4
; 3 : FXO : 4
;----------------------------------------------