EasyManuals Logo

AudioCodes Mediant MSBR Series User Manual

AudioCodes Mediant MSBR Series
801 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #431 background imageLoading...
Page #431 background image
Version 7.2 431 Mediant MSBR
Reference Guide 65. proxy-set
65 proxy-set
This command configures the Proxy Sets table, which lets you define Proxy Sets. The table
is a parent of the Proxy Address table.
Syntax
(config-voip)# proxy-set <Index>
(proxy-set-<Index>)#
Command Description
classification-input
{ip-only|ip-port-
transport}
Defines how the <device> classifies incoming IP calls to
the Proxy Set.
dns-resolve-method {a-
record|ms-
lync|naptr|not-
configured|srv}
Defines the DNS query record type for resolving the proxy
server's host name (FQDN) into an IP address.
fail-detect-rtx
Defines the maximum number of UDP retransmissions
that the <device> sends to an offline proxy, before the
device considers the proxy as being offline.
gwipv4-sip-int-name
Assigns an IPv4-based SIP Interface for Gateway calls to
the Proxy Set.
gwipv6-sip-int-name
Assigns an IPv6-based SIP Interface for Gateway calls to
the Proxy Set.
is-proxy-hot-swap
{disable|enable}
Enables the Proxy Hot-Swap feature, whereby the
<device> switches to a redundant proxy upon a failure in
the primary proxy (no response is received).
keepalive-fail-resp
Defines SIP response codes that if any is received in
response to a keep-alive message using SIP OPTIONS,
the <device> considers the proxy as down.
min-active-serv-lb
Defines the minimum number of proxies in the Proxy Set
that must be online for the <device> to consider the Proxy
Set as online, when proxy load balancing is used.
proxy-enable-keep-
alive {disable|using-
options|using-
register}
Enables the <device>'s Proxy Keep-Alive feature, which
checks communication with the proxy server.
proxy-ip
Defines the Proxy Address table, which defines
addresses for the Proxy Set. The table is a child of the
Proxy Sets table. For more information, see Section 65.1.
proxy-keep-alive-time
Defines the interval (in seconds) between keep-alive
messages sent by the <device> when the Proxy Keep-
Alive feature is enabled (see the 'Proxy Keep-Alive'
parameter in this table).
proxy-load-balancing-
method
{disable|random-
weights|round-robin}
Enables load balancing between proxy servers of the
Proxy Set.

Table of Contents

Other manuals for AudioCodes Mediant MSBR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant MSBR Series and is the answer not in the manual?

AudioCodes Mediant MSBR Series Specifications

General IconGeneral
BrandAudioCodes
ModelMediant MSBR Series
CategoryNetwork Router
LanguageEnglish

Related product manuals