AudioCodes Mediant MSBR Series

Reference Guide 430 Document #: LTRT-17939
Mediant MSBR
Command Description
replace-with
Defines a pattern, based on regex, to replace the matched
pattern.
Command Mode
Privileged User
Example
This example replaces the user part (if exists) in the From header URL with "1000", for INVITE
messages:
(config-voip)# message pre-parsing-manip-sets 0
(pre-parsing-manip-sets-0)# pre-parsing-manip-rules 1
(pre-parsing-manip-rules-0/1)# message-type invite.request
(pre-parsing-manip-rules-0/1)# pattern From: *<sip:([^@]+)(@\S*)
(pre-parsing-manip-rules-0/1)# replace-with ‘From: <sip:’ + ‘1000’
+ $2
(pre-parsing-manip-rules-0/1)# activate