Reference Guide 5. Debug Commands
Version 7.2 71 Mediant MSBR
5.17 debug exception-info
This command displays debug information about the exceptions.
Syntax
# debug exception-info <Exception Number>
Command Description
folder <Exception
Displays debug information concerning the specified
exception number.
Command Mode
Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example shows how to display debug information related to exception 1:
# debug exception-info 1
There are 6 Exceptions
Exception Info of Exception 1:
Trap Message - Linux Signal
Board Was Crashed: Signal 10, Task CMDS
BOARD MAC : 00908F8CD326
EXCEPTION TIME : 2.2.2017 11.47.34 UP TIME (Seconds) : 5943
VERSION: Time 17.31.16, Date 31.1.17, major 680, minor 336, fix 2
Cmp Name:ramMP500_MSBG_LAB Board Type:69
RELATED DUMP FILE : core_MP500_MSBG_ver_680-336-
2_mac_00908f8cd326_LAB_TPApp_2-2-2017_11-47-34.gz
ZERO:00000000 AT:8802bbf0 V0:87654321 V1:11ae7618 A0:00000003
A1:00000044 A2:00000009 A3:11741488
T0:11a9a7f0 T1:11aa8860 T2:11940450 T3:00000002 T4:00000000
T5:00000001 T6:88021038 T7:00000020
S0:2eccf254 S1:12c56250 S2:12c60000 S3:00000002 S4:2eccf254
S5:2eccf1e4 S6:00000002 S7:00000001
T8:00000000 T9:11694ebc K0:00000010 K1:00000000 GP:12bbcc00
SP:2eccf0e0 FP:00000001
stack_t - ss_sp:00000000 ss_size:00000000 ss_flags:00000002
PC:11695248 +0
RA:10539b28 +0
Trace 0:11695248 +0
Trace 1:10539b28 +0
Trace 2:10539dbc +0
Trace 3:1053ab68 +0
Trace 4:109b2a60 +0
Trace 5:10720fb0 +0
-- More --