AudioCodes Mediant MSBR Series User Manual (English)

To Next Page

To Previous Page

Version 7.2 747 Mediant MSBR

Reference Guide 75. Layer-3 Commands

75.3 GRE and IPIP Tunnel Interface Commands

The section describes the GRE and IPIP Tunnel Interface commands.

75.3.1 interface gre|ipip

This command enters a specific WAN tunnel interface configuration. Use the no form of this

command to delete the interface.

Syntax

interface gre <greID>

interface ipip <ipipID>

Command Description

greID Assigns a gre tunnel interface id in the range of 1-255.

ipipID Assigns an ipip tunnel interface id in the range of 1-255.

Default

Note

This command is applicable only to data-router functionality.

Command Mode

Privileged User

Example

This example enters a gre id 6 tunnel interface configuration:

(config data)# interface gre 6

75.3.1.1 napt

This command sets the NAPT (Network Address Port Translation) on the specified tunnel

interface. Use the no form of this command to set route mode.

Syntax

napt

Default

By default, napt is used.

Other manuals for AudioCodes Mediant MSBR Series

Need help?

Do you have a question about the AudioCodes Mediant MSBR Series and is the answer not in the manual?

General