Reference Guide 90 Document #: LTRT-17939
Mediant MSBR
Command Mode
Privileged User
Note
The command is applicable only to the SBC application.
Test calls can be made with the following two recommended commands:
• (Basic) Making a call from one phone number to another, without performing any
configuration:
debug test-call ip dial from * to * dest-address * [sip-
interface *]
• (Advanced) Configuring a row in the Test Call table, and then placing a call by
the row index:
debug test-call ip dial from id *
5.35 debug usb
This command debugs the USB stick connected to the device.
Syntax
# debug usb devices
Command Description
devices
Displays information about the USB stick (e.g., manufacturer)
connected to the device.
Command Mode
Privileged User
To Next Page
Loading...
