AudioCodes Mediant MSBR Series User Manual

Version 7.2 29 Mediant MSBR
Reference Guide 3. CLI Structure
3 CLI Structure
This section describes the CLI structure.
3.1 CLI Command Modes
Before you begin your CLI session, you should familiarize yourself with the CLI command
modes. Each mode provides different levels of access to commands, as described below.
3.1.1 Basic User Mode
The Basic User command mode is accessed upon a successful CLI login authentication. Any
user level can access the mode. The commands available under this mode are limited and
only allow you to view information (using the show commands) and activate various
debugging capabilities.
Welcome to ...
Username: Admin
Password: <Password>
>
The Basic User mode prompt is ">".
3.1.2 Privileged User Mode
The Privileged User command mode is the high-level tier in the command hierarchy, one step
up from the Basic User mode. A password is required to access the mode after you have
accessed the Basic User mode. The mode allows you to configure all the device's settings.
Once you have logged in to the device, the Privileged User mode is accessed by entering
the following commands:
> enable
Password: <Privileged User mode password>
#
The Privileged User mode prompt is "#".
Note: The default password for accessing the Privileged User mode is "Admin" (case-
sensitive). To change this password, use the privilege-password command.
The Privileged User mode groups the configuration commands under the following command
sets:
 Network: Contains IP network-related commands (e.g., interface and dhcp-server):
# configure network
(config-network)#
 System: Contains system-related commands (e.g., clock, snmp settings, and web):
# configure system
(config-system)#
 Troubleshoot: Contains logging-related commands (e.g., syslog, logging and test-
call):
# configure troubleshoot
(config-troubleshoot)#

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English