AudioCodes Mediant MSBR Series User Manual

Reference Guide 750 Document #: LTRT-17939
Mediant MSBR
75.4 GARP Commands
This section describes the GARP commands.
75.4.1 garp timer
This command configures the GARP timer.
Syntax
garp timer <Time>
Command Description
timer
Defines the time in seconds (1-3600, default is 60).
Default
60 (seconds)
Note
 This command is applicable only to data-router functionality.
 This command is applicable only to Gigabit Ethernet and fiber WAN interfaces (VLAN
1 only).
Command Mode
Privileged User
Related Commands
garp enable
Example
This example configures the GARP timer to 6 seconds:
(config data)# garp timer 6
75.4.2 garp enable
This command enables GARP per interface.
Syntax
garp enable
no garp enable
Default
Disabled

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English