Version 7.2 751 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Note
This command is applicable only to data-router functionality.
This command is applicable only to Gigabit Ethernet and fiber WAN interfaces (VLAN
1 only).
Command Mode
Privileged User
Related Commands
garp timer
Example
This example enables the GARP timer on the Gigabit 0/0 WAN interface:
(config-data)# interface gigabitethernet 0/0
(conf-if-GE 0/0)# garp enable
To Next Page
Loading...
