AudioCodes Mediant MSBR Series User Manual

Reference Guide 790 Document #: LTRT-17939
Mediant MSBR
76.10 Ethernet Commands
The following describes Ethernet commands.
76.10.1 ethernet l2tunnel
This command enables tunneling for different Layer-2 protocols.
Syntax
# ethernet l2tunnel {cdp|dtp|hex <hex protocol>|
lacp|lldp|pagp|pvst-plus|stp|udld|vtp}
Command Description
hex protocol Hexadecimal protocol number
cdp Cisco Discovery Protocol
dtp Dynamic Trunking Protocol
hex Ethernet protocol type in hexadecimal
lacp Link Aggregation Control Protocol
lldp Link Layer Discovery Protocol
pagp Port Aggregation Protocol
pvst-plus Per-VLAN Spanning Tree Plus
stp Spanning-Tree Protocol
udld UniDirectional Link Detection
vtp VLAN Trunking Protocol
Command Mode
Privileged User
Example
This example enables tunneling for cdp.
(config-data)# ethernet l2tunnel cdp

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English